pacific seacraft orion sailboat

Description

Pacific Seacraft Orion Sailboat

1980 Model that has been customized and is not complete. Will sell for $20,000. - No Offers Considered. Sale must be completed by August 30, 2016. It's in a boatyard, out of water right now in Channel Islands Harbor, CA. If not sold it will be going into deep storage and completed in the future.

Need to sell to help a family member.

Parts alone are worth the price.

Great deal for someone that wants to get a great boat and finish the project.

Interior is partially finished and requires someone with woodworking and electrical skills.

The port cabin side ports leaked and a new cabin side Teak veneer plywood needs installed and ports installed.

Hull has been painted white. Blue boot and sheer stripes.

For those that aren't dreamers and have the cash now to buy the boat you are welcome to call me on (800) 200-8839. If you don't have a good eBay rating, don't contact me. No scammers, no hull kickers, I'm already taking a great $$$$ loss.

The buyer also gets a bunch of anchors, chain, rode, other boat parts and if interested, a ton of boat parts and pieces new and old. Need to get rid of my boat gear - at a marine swap meet it would be worth a lot of $$$$!

This is a serious great deal.

Here's a good link about Pacific Seacraft Orion models : bluewaterboats.org/pacific-seacraft-orion-27/

LOA: 30′ 11″ (including bowsprit) +/-
LOD: 27′ 4″
LWL: 22′ 2″
Beam: 9′ 3″
Draft: 4′ 0″
Displacement: 10,000 lbs. +/-
Ballast: 3,500 lbs.
Sail Area, Sloop: 428 sq.ft. +/-
Sail Area, Yawl: 452 sq.ft. +/-
Sail Area, Cutter: 508 sq.ft. +/-
Bridge Clearance: 40′ 11″ +/-

Photos coming.

Equipment:

Rigging & Sails

• Replacement Selden Mast
• ReplacementSelden Boom – One Line Double Reef System Built into Boom
• ReplacementSelden Rigid Boom Vang - Never installed.
• Selden/Furlex 200s Roller Furling Unit
• Stainless Steel Bowsprit
• (4) Stainless Steel Andersen Self-Taliling Winches - New, Need to be installed
• New Sails - Never Used
• North Sails Mainsail
• North Sails Genoa
• North Sails Staysail
• 1X19 Stainless Steel Wire Standing Rigging
• Norseman Standing Rigging End Fittings
• Harken Traveler System - needs to be installed
• Spinnaker Pole
• New Garhauer Line Adjustable Genoa Cars
• New Genoa 6’ Tracks (2) Chromeed bronze not installed, NOS
• Custom Inner Stay (cutter) Stainless Steel Fitting

Electronics/Navigation

• Raymarine C70 Multi-Function Unit - Used a few times to test.
• Raymarine GPS Antenna
• New Raymarine ST60 Speed - New, Not installed
• New Raymarine ST60 Depth - New, Not installed
• New Raymarine ST60 Wind Speed/Direction - New, Not installed
• Plastimo Compass
• Charts
• ICOM IC-M502 VHF Radio
• Hand-Held VHF Radios
• Several Hand-Held GPS Units

Engine

• Yanmar 2GM20F Freshwater Cooled Engine – Low Hours
• New stuffing box
• New propeller shaft
• (1) 3-Blade Bronze Propeller
• (1) New 2-Blade Bronze Propeller
• New Fuel Tank
• New Racor Fuel Filter

Electrical

• New AC Voltage Electrical Panel
• New Large DC Voltage Electrical Panel
• Guest 40-Amp Battery Charger
• (4) Flat Type AGM Batteries
• (1) Group 24 Wet Cell Battery

Additional

• Dodger
• Large Edson Manual Bilge Pump
• New (6) Sheets of Treadmaster Non-Skid
• New (8) Stainless Steel Newfound Metal Opening Ports
• New Microwave Oven
• Custom Stainless Steel Cabin Top Handrails
• Pioneer CD Stereo (XM Ready)
• Teak Trim
• Teak Veneer Plywood
• Sterling LP Painted
• Lavac Vacuum Type Toilet
• Various Lights
• Electrical Wires Various Sizes and Lengths